Home Technique • Download Einfaelle statt Abfaelle - Langsamlaeufer Windrad by Christian Kuhtz PDF

Download Einfaelle statt Abfaelle - Langsamlaeufer Windrad by Christian Kuhtz PDF

By Christian Kuhtz

Einfachste Bauweise! Aus Waschmaschinenschrott und Holz. Nutzt den schwächsten Wind. Lautlos, leistungsfähig und stabil!
Aus dem Inhalt:
Die eigene Stromversorgung
Bauprinzip, Versuch und Erfolg
Geeignete Waschmaschinenmotoren
Das Getriebe
Achse und Lager aus Waschmaschinen ausbauen
Flügel-Maße und Bauweisen
Bau von Holz- und Blechflügeln ganz einfach
Nabe und Zusammenbau des Flügelrades
Ausrichten und Prüfen des Flügelrades
Bau des Rahmens, Motor-Halterung, Steuerfahnen
Die Sturmsicherung, Funktion und Details
Selbst einrastende Sturmsicherung
Lagerung auf dem Mast, Bremsseil, Kabel, Regenschutz
Elektrischer Anschluss, encumbered der Batterie, Ladeanzeige

Gebrauch des Windrads:
Nutzung des gewonnenen Stroms, Wartung des Windrads
Damit die Batterien noch lange halten…


Windmessgerät selbst gebaut
Vergleichsmessungen Langsamläufer-Windrad / Schnellläufer-Windrad
Messungen auf dem Prüfstand: Waschmaschinenmotor als Generator
Was guy noch alles mit Waschmaschinenmotoren bauen könnte

Show description

Read Online or Download Einfaelle statt Abfaelle - Langsamlaeufer Windrad PDF

Best technique books

Singular Perturbation Methods in Control

Singular perturbations and time-scale ideas have been brought to regulate engineering within the overdue Sixties and feature because develop into universal instruments for the modeling,analysis and layout of keep watch over structures. The 1986 version of this booklet, reprinted the following in its unique shape, presents the theoretical starting place for consultant keep an eye on functions.

Extra info for Einfaelle statt Abfaelle - Langsamlaeufer Windrad

Sample text

S-mm hole is drilled through an adjacent plate hole using the green (neutral) end of the DCP drill guide. S-mm cortex tap, and the first screw is inserted An eccentric drill hole is made in the opposite fragment using the yellow end of the DCP drill guide, making sure the arrow points to the fracture. Correct placement of the bit can be checked by looking at the lower part of the drill guide. The hole is tapped and the screw inserted. ~ =::-:="'" b Twice as much compressive displacement can be obtained by inserting a second screw by the same technique.

5-mm DCP can also function as a neutralization plate. In this case all the screw holes are drilled centrally through the green, neutral drill guide. The oval holes of the DCP permits screws to be inserted at an angle if required. This may be necessary to avoid a fracture line or a previously placed lag screw (Fig. 32d). Oblique fracture lines should be compressed with a plate screw whenever possible, as this significantly augments the stability of the fixation (Fig. 32c). 0-mm DCP, the technique is the same, using correspondingly smaller instruments and a smaller compressive displacement.

It is virtually impossible to correct malalignment by drilling new holes. This technique is designed to avoid the two most common errors in this type of internal fixation: - Axial malalignment with use of the T plate. This results from eccentric tensile forces that arise when the fracture is compressed before both screws have been -inserted in the T piece of the plate (Fig. 38 b). - Rotational mal alignment with the oblique L plate. This occurs when the delayed insertion of a screw off the long axis of the plate alters the rotational alignment of the bone (Fig.

Download PDF sample

Rated 4.04 of 5 – based on 34 votes